球探即时比分下载

供应产品 > 点胶阀 > 点胶阀定制 Home > Products > Dispensing Valves > Customized Dispensing Valves
点胶阀定制

Product center

点胶阀定制
  • 点胶阀定制

Dispensing valve customization

Product name: Dispensing valve

Product price: 111.00

Number of products: 100

Shelf life / repair period: 1

Warranty / Repair Unit: Year

Updated: 2019-06-11

Dispensing valve customization details

Product characteristics:


AB double liquid dispensing valve: use a variety of static mixing tubes of different specifications, overall corrosion resistance, accurate dispensing, customized dispensing valve, diaphragm electronic and electrical production line, no dripping or drawing (with vacuum back suction), dispensing valve Customized, ab dispensing valve related, suitable for two-component glue adjustment in the range of 1: 3.

Technical parameters:

1: type: thimble type (adjustable)

2: Use air source: 4-7Kgf / cm

3: Minimum spit out: 0.01ml

4: Operating viscosity: 1-1.000.000cps

5: Body material: Aluminum alloy anodized, stainless steel

6: Feeding ruler: 1/8 NPT internal thread

7: Operating speed: <600 / min

8: Control method: Two-position five-way solenoid valve

9: Use range: AB two-component glue ratio can be adjusted

A Section Suction Type AB Two-Component Dispensing Valve Stainless Steel Adjustable Dispense Valve Precision Dispensing Valve

Compatible Colloid Adhesive Flux Solder Paste Epoxy Sealant

FeaturesEasy to use and install Mechanical parts that do not require cleaning Syringe volumes between 3 ml and 6

Product characteristics:


AB double liquid dispensing valve: using a variety of static mixing tubes of different specifications, overall corrosion resistance, accurate dispensing, no dripping or drawing (with vacuum back suction), suitable for two-component glue adjustment within the range of 1: 3.

Technical parameters:

1: type: thimble type (adjustable)

2: Use air source: 4-7Kgf / cm

3: Minimum spit out: 0.01ml

4: Operating viscosity: 1-1.000.000cps

5: Body material: Aluminum alloy anodized, stainless steel

6: Feeding ruler: 1/8 NPT internal thread

7: Operating speed: <600 / min

8: Control method: Two-position five-way solenoid valve

9: Use range: AB two-component glue ratio can be adjusted

There are two types of dispensing valves: pneumatic and electric. Pneumatic: The dispensing valve is made up of three parts: the cylinder, the valve body, and the material cylinder. The cylinder and the valve body are separated by advanced sealing materials to prevent glue from entering the cylinder. The material cylinder and the air cylinder are connected to the main body of the dispensing valve to ensure concentricity with the air cylinder. The pneumatic cylinder is moved by a solenoid valve, thereby driving the center rod to move up and down, and using the center rod to move up and down to achieve the opening and closing of the glue. According to the different opening and closing methods, it is divided into: plunger dispensing valve, thimble dispensing valve, lift dispensing valve, spray dispensing valve, spray dispensing valve; different switching methods, applicable fluids are also The difference is that the back-suction type dispensing valve uses an upward movement to close the glue structure, so that the glue can be stopped at the same time. The dispensing valve is customized. The screw dispensing valve is related, which reduces the residual glue on the needle and prevents the dispensing. Leakage, drawing, etc. occur. The valve body is anodized by aluminum alloy. The latest PTFE material is used as the sealing material, and the contact colloid parts are all corrosion-resistant materials. Electric: Includes pump body and driving part, with stator, easy installation. Adopting fixed rotor structure design, good sealing performance. The rotor and stator pairs form a self-sealing structure and are easy to replace. Through the directional rotation of the rotor in the stator cavity, the medium conveying function is realized. The conveying process does not have any influence on the performance of the medium. At the same time, the motor can be reversed by the motor to easily realize the medium suction function. Zhuhai Ailte Automation Equipment Co., Ltd., Ailte automation equipment, to ensure that the medium and materials are clean, without drips and pollution!


Custom Valve Supplier Information

company name: Zhuhai Airt Automation Equipment Co., Ltd. Industry: business services
Enterprise Nature: Private enterprise Company Size: 50--100 people
Registered capital: 50--1 million Company registration time: 2018-01-01
company address: Zhuhai Datou District Zhufeng Avenue Lixing Furniture Factory Ailte Automation Equipment Co., Ltd Business license registration number:

Corporate Information
Zhuhai Ai Erte Automation Equipment Co., Ltd. <br> Contact: Li Jinfu Company Address: Ai Erte Automation Equipment Co., Ltd. in Lixing Furniture Factory, Zhufeng Avenue, Doumen District, Zhuhai City. http://www.zharttech.com/
share to:
contact details
Contact: Li Jinfu
Phone: 0756-6906518
Mobile: 13622962291
Email: art.pd@arttech.com.cn
Postcode: 519000

Enterprise Online

Customer Service: QQ交谈

Customer Service: 0756-6906518

Mobile: 13622962291

Scan the QR code on your phone to enter the official website



contact us

Zhuhai Datou District Zhufeng Avenue Lixing Furniture Factory Ailte Automation Equipment Co., Ltd

Phone: 0756-6906518 Mobile: 13622962291
Email: art.pd@arttech.com.cn